This internal website is for City of San Rafael employees. The public website is www.cityofsanrafael.org.

HOW TO APPLY AND REMOVE AN LDH HOSE CLAMP

  1. Remove clamp from engine 
  2. Locate the coupling to apply clamp on 
    • At least 20’ behind engine 
      • Forward lay 
    • First coupling to drop from hose bed 
      • Reverse 
  3. Open clamp  
  4. Pistol grip
    • Apply 18” behind the coupling on the supply side 
      • Screw down snugly on hose 
  5. Keep hose centered in clamp assembly 

 

REMOVING CLAMP 

  1. Secure clamp with foot on latch side 
  2. Use both hands to rotate the clamp jaw up until completely above hose 
  3. Release latch side  
  4. Keep clamp in place under hose 
Close window